SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Forklift Part
Used Forklift Part - Eventually, forklift components would wear and should be replaced. Obtaining new components can become a costly venture so one more idea is to obtain used forklift components. This can save much money eventually. It is a great idea to purchase used lift truck parts which have been remanufactured. These components will ensure that you are getting components which will work for a long time and be productive.
Broken or worn parts that are remanufactured are a cheaper answer compared to rebuilding. With rebuilding parts, just the components which are broken or worn out get changed, which means that other wearable components can break down soon after purchase.
Remanufacturing on the other hand provides the best assurance for second-hand parts. Remanufactured components are taken apart and cleaned and then all wearable pieces are replaced. All wearable components are replaced regardless of age or wear which is another rationale why reproduced components generally work so much better. Whichever part within the part is new and this provides far longer life to the used part. Depending on the lift truck parts that are being redone, the cleaning process and the complete remanufacturing process would vary.
After complete disassembly, the engines are oven cleaned. Different parts of the engine like for example rings, pistons, spark plugs, filters, valves, and valve springs can be replaced during the remanufacture process. The engines are hot tested after reassembly to ensure that there are no oil pressure problems, no leaks, noises or any vacuum.
Transmissions are one more thing that is oven cleaned after being disassembled. The transmission is then pressure washed. A complete inspection is done to be able to check for any cracks. Seals, bearings and bushings are all replaced. Usually, the replacement components used on transmission parts meet OEM specifications.
Some forklift components such as the alternator, the water pump, torque converters, the starter and steer axles can be quite serviceable after worn parts are replaced. The electronic control in the electric forklift is maintained by the control card. This card can also be reproduced with replacing all aged and worn out components. Unlike other lift truck parts the control card can only have the worn and aged components replaced.
Parts which are remanufactured have to be comprehensively examined upon reassembly to ensure they are in good condition prior to being sold. When purchasing these components, it is a good idea to be sure that they have undergone all of the proper testing and inspections. On certain larger components such as engines, transmissions and steer axles, OEM specification replacement components should be used.
The lift truck dealer could ensure that the components they have reproduced meet the OEM specifications. This will even guarantee the components meet industry standards. Lots of details go into remanufacturing second-hand components. This attention to detail offers more serviceability out of remanufactured parts opposed to the parts that were only rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
forkliftpartsvirginia.com
Email Us
About Us